Architectural outdoor die-cast AC / Emergency light
Architectural outdoor die-cast AC / Emergency light
Dallas-Fort Worth
972-290-0149
24V Tape Light Drivers
PWM-60 and 120 series LED drivers feature the constant voltage mode with PWM output, which is able to maintain the brightness homogeneity when driving all kinds of LED tape lights. Thanks to the high efficiency up to 90%, with a fanless design, the drivers are rated to operate between - 40 F to 185 F case temperature level and is suitable to work for dry, wet and damp locations and is IP 67 rated. Ideal for use when dimming is needed at 277V input.
- Universal AC input / full (90 to 305 VAC)
- High efficiency up to 95%
- Built-in 3 in 1 dimming function
- No load power consumption < 0.5W
- Working temperature -40F to 185F
The LPV-60-24 is an LED driver that converts AC to DC power supply from Mean-Well USA, Inc. ideal for use with DTH 8MM60D when dimming is not necessary. It has an output voltage of 24V and maximum output power of 60W. This part's single output can handle a current up to 2.5A. This driver is IP67 water proof and comes with a 2 year manufacturers warranty.
* Universal AC input / 90-240 VAC
* Withstand 260 VAC surge input for 5 seconds Cooling by free air convection
* Protections: Short Circuit / Over Load / Over voltage
* Fully isolated plastic case
The DRCV-80 and DR-CV-40 are LED drivers that have selectable constant current and contant voltage output. These are ideal drivers for our tape lights. These drivers feature a low profile contemporary design perfect to mount under the lip of any cabinet and includes built in junction boxes for wire connections. They have an output voltage of 24V and maximum output power of either 40W or 80W depending on the model.
* Working mode : Single Output Constant voltage
* High efficiency >80%
* Dimming mode: Triac
* Outer case: Aluminum